Diagnostic fee WAIVED with repair
07080Piscataway, NJCommercial
JennAir

Commercial JennAir Oven / Range Repair — Piscataway ZIP 07080, NJ

JennAir-trained technicians experienced with their RISE and NOIR collections, TriFecta dishwasher, column refrigeration, and advanced slide-in range systems.

$150–$450
Typical cost
1–2 hours
Repair time
90-Day
Warranty
  • JennAir-certified technicians
  • Same-day service in zip 07080
  • Genuine OEM parts
  • Upfront pricing
  • 90-day parts & 30-day labor warranty
(973) 718-9373

Schedule Your Repair

1st Appointment
$15 OFF
off repair cost
Return Customer
$20 OFF
off repair cost
Veteran & Military
$20 OFF
off repair cost
Senior (65+)
$20 OFF
off repair cost
1
2
3
4

Service Type

What type of service do you need?

Or call us directly:

(973) 718-9373

About JennAir Oven / Range Repairs

JennAir is a premium Whirlpool brand known for luxury ranges, built-in refrigeration, and the original downdraft ventilation system. Complex systems require specialist repair.

Common JennAir Issues

  • Downdraft fan failure
  • Control board errors
  • Igniter problems
  • Temperature sensor issues
  • Door hinge wear

Why Choose ProFix for JennAir

  • JennAir-certified technicians
  • Genuine OEM parts in stock
  • Same-day service in Piscataway
  • 90-day parts & 30-day labor warranty on all repairs
  • No fix, no fee guarantee

JennAir Oven / RangeOven Not Heating in 07080

High urgency

The oven fails to heat to any temperature when the bake or broil function is selected.

Common Causes

  • 1Bake element burned out (electric)
  • 2Gas igniter failed (gas)
  • 3Thermal fuse blown
  • 4Control board not sending heat signal
  • 5Temperature sensor failure giving wrong reading

How We Fix It

Our technician will test the element, igniter, thermal fuse, and sensor to identify and replace the failed heating component.

Typical repair cost: $150–$450
Avg repair time: 1–2 hours · 90-day parts & 30-day labor warranty
Call (973) 718-9373

JennAir Oven / RangeUneven Heating in 07080

Standard

Food that burns on one side or comes out undercooked indicates temperature regulation problems.

Common Causes

  • 1Partially failed bake element
  • 2Defective temperature sensor
  • 3Failing control board
  • 4Poor rack positioning
  • 5Convection fan failure

How We Fix It

We measure oven temperature accuracy with a calibrated thermometer, test the sensor and element, and recalibrate or replace as needed.

Typical repair cost: $150–$450
Avg repair time: 1–2 hours · 90-day parts & 30-day labor warranty
Call (973) 718-9373

JennAir Oven / RangeDoor Won't Close Properly in 07080

Standard

A poorly sealing oven door wastes energy and creates uneven cooking temperatures.

Common Causes

  • 1Worn door hinge
  • 2Damaged door gasket
  • 3Misaligned door
  • 4Bent hinge receiver
  • 5Broken door spring

How We Fix It

We replace worn hinges, door gaskets, and springs to restore a proper door seal.

Typical repair cost: $150–$450
Avg repair time: 1–2 hours · 90-day parts & 30-day labor warranty
Call (973) 718-9373

JennAir Oven / RangeSelf-Clean Not Working in 07080

Standard

A self-clean cycle that won't start or complete is usually a door lock or thermal issue.

Common Causes

  • 1Faulty door lock motor
  • 2Blown thermal limiter
  • 3Control board error
  • 4Temperature sensor failure
  • 5Door latch assembly wear

How We Fix It

We test the door lock motor, thermal limiter, and control board to restore self-clean function.

Typical repair cost: $150–$450
Avg repair time: 1–2 hours · 90-day parts & 30-day labor warranty
Call (973) 718-9373

JennAir Oven / RangeBurner Not Working in 07080

Standard

A surface burner that won't ignite or heat is a common gas and electric range repair.

Common Causes

  • 1Clogged igniter port (gas)
  • 2Cracked ceramic igniter (gas)
  • 3Faulty surface element switch (electric)
  • 4Broken coil element (electric)
  • 5Spark module failure (gas)

How We Fix It

We clean igniter ports, test igniters and spark modules (gas), or replace surface elements and switches (electric).

Typical repair cost: $150–$450
Avg repair time: 1–2 hours · 90-day parts & 30-day labor warranty
Call (973) 718-9373

JennAir Oven / RangeDisplay / Control Issue in 07080

High urgency

A blank or malfunctioning control panel prevents you from using your oven's features.

Common Causes

  • 1Control board failure
  • 2Touchpad membrane damage
  • 3Power surge damage
  • 4Loose ribbon cable
  • 5Membrane switch failure

How We Fix It

We test the control board and touchpad assembly, check ribbon cable connections, and replace the faulty control components.

Typical repair cost: $150–$450
Avg repair time: 1–2 hours · 90-day parts & 30-day labor warranty
Call (973) 718-9373

JennAir Oven / RangeOven Temperature Inaccurate in 07080

Standard

The oven temperature is significantly higher or lower than the set temperature, causing cooking results to be inconsistent.

Common Causes

  • 1Temperature sensor (RTD) drifting from calibration
  • 2Temperature sensor failure
  • 3Control board not properly processing sensor input
  • 4Heating element failing at reduced capacity
  • 5Convection fan not distributing heat evenly

How We Fix It

Our technician will test temperature accuracy with a calibrated thermometer, test the sensor, and recalibrate or replace the sensor and control board as needed.

Typical repair cost: $150–$450
Avg repair time: 1–2 hours · 90-day parts & 30-day labor warranty
Call (973) 718-9373

JennAir Oven / RangeGas Smell from Oven in 07080

Safety issue

A gas odor is detectable when the oven is in use or shortly after turning it off.

Common Causes

  • 1Normal gas smell during ignition (a few seconds — not a concern)
  • 2Gas valve not fully sealing after burner shuts off
  • 3Igniter failing and releasing unburned gas before lighting
  • 4Gas supply line connection loose
  • 5Prolonged gas release indicating ignition failure

How We Fix It

A brief gas smell during ignition is normal. Persistent gas smell is a safety emergency — evacuate and call us immediately.

Typical repair cost: $150–$450
Avg repair time: 1–2 hours · 90-day parts & 30-day labor warranty
Call (973) 718-9373

JennAir Oven / RangeBake Element Burned Out in 07080

High urgency

The lower electric bake element has burned through, stopping bake function completely.

Common Causes

  • 1Visible burn hole or crack in element
  • 2Age-related failure after 5–10 years
  • 3Food spill contacting hot element causing chemical burn-through
  • 4Power surge
  • 5Grease buildup causing hot spot burn

How We Fix It

Our technician will replace the bake element with an OEM part — a common and relatively affordable repair.

Typical repair cost: $150–$450
Avg repair time: 1–2 hours · 90-day parts & 30-day labor warranty
Call (973) 718-9373

JennAir Oven / RangeBroil Element Burned Out in 07080

Standard

The upper electric broil element has failed, stopping the broil function.

Common Causes

  • 1Burned-through element from age or food contact
  • 2Power surge damage
  • 3Grease splatter causing element burn-through
  • 4Normal end-of-life failure
  • 5Incorrect use (covering element with foil)

How We Fix It

Our technician will replace the broil element and inspect the oven interior for other grease or damage issues.

Typical repair cost: $150–$450
Avg repair time: 1–2 hours · 90-day parts & 30-day labor warranty
Call (973) 718-9373
FAQ

FAQ — JennAir Oven / Range Repair in 07080

Can't find your answer? Book a service call or call us now.

Still have questions?

Our NJ team is ready — same-day service across Essex and Morris Counties.

JennAir Oven / Range Broken? We're in 07080 Today

Commercial repairs · All issues · 90-day parts & 30-day labor warranty

CallBook